AirLive WFP-151U - Manual (Page 49)

5. Server Configuration
AirLive WFP-151U User’s Manual 44
In the Infrastructure mode, you have to let the MFP Server associate with an access point.
You let the MFP Server scan for an available access point automatically or manually assign
the SSID of the access point you want to use.
If you select to let the MFP Server scan for an available access point, the following window
will pop up.
The table will list the available access points near the MFP Server. Select an access point
in the list and click “Next”. If you cannot find the access point that you want to use, click
“Scan” to let the MFP Server scan again.