AirLive WFP-151U - Manual (Page 112)

9. MFP Server Installation in UNIX/Linux
107
AirLive WFP-151U User’s Manual
variants separated by vertical bars (name1|name2).
The rm= entry should correspond to the IP address you have assigned to the MFP
Server. You can also use a host name if you have assigned one in the /etc/hosts file.
The sd= entry should correspond to the spool directory you created in the previous step.
The rp= entry should correspond to the port name of the remote printer. The values
should be one of lpt1, lpt2 or lpt3 depends on the printer port.
The MFP Server should now be available for printing from your Unix/Linux host.