AirLive WFP-151U - Manual (Page 37)

4. MFP Manager
AirLive WFP-151U User’s Manual 32
The current status of the MFP will be displayed here.
“Connected” indicates that you are connecting to the MFP.
“Busy” indicates the MFP is being used. “Idle” indicates
that the MFP is free to use by any users. Status
If the MFP is free to use, the “Connect” will be available to
click for occupying the MFP. Or it will be grayed. Connect
Disconnect the selected MFP. The “Disconnect” will be
available only for the current user. Disconnect
To check more information about the MFP Server and the
MFP, please click this button. The information will be listed
as the illustration above. Information
4.5 Option Settings
4.5.1 General Setting
Execute the “MFP Manager” when Windows starts
every time. By default, it is enabled. Run MFP Manager
when Windows starts
Minimized the “MFP Manager” to an icon in the
system tray when you start the “MFP Manager”. By
default, it is disabled. Minimized when start
MFP Manager
Refresh status every Setup the refresh interval for device status update.