2 console mode – AirLive WFP-151U User Manual

Page 108

9. MFP Server Installation in UNIX/Linux

103

AirLive WFP-151U User’s Manual

9. If the test page is printed without problem, please click “Yes”. If it is failed to print, please

click “No” to go back to “Printer configuration - fedora” screen and configure again.

9.2 Console Mode

To configure the MFP Server for LPD printing, perform the procedures below:

1. Enable MFP Server’s TCP/IP Support.

2. Set up MFP Server’s IP address.

3. Verify MFP Server’s IP Address.

4. Configure remote LPD printing on the host.

5. Print a test page.

In the next sections, we will describe these five procedures step by step.