AirLive WFP-151U - Manual (Page 118)

11. Troubleshooting
113
AirLive WFP-151U User’s Manual
This section is intended to help you solve the most common problems on the WFP-151U.
1. This product is not found even after searching by the “MFP Manager”.
„ Check if the power adapter and the network cable are connected to the MFP Server
properly.
„ Check if the LAN is turned on.
„ Check if the IP Address of the MFP Server is in the network segment same as your
computer.
- If you are not sure about IP Address setting of the MFP Server, please check the
TCP/IP setting of the MFP Server from the “Server Manager”.
2. The ways to change the IP Address of the MFP Server.
„ A DHCP Server is installed in the network
If a DHCP Server is installed, you can setup to let the MFP Server get IP Address
from the DHCP Server automatically.
1. Open “Server Manager” and then select “TCP/IP” setting.
2. Select “Auto IP” and click “Save”.
3. Reboot the MFP Server.
„ Set up the IP Address Manually
1. Open “Server Manager” and then select “TCP/IP” setting.
2. Select “Static IP” and enter the IP Address and Subnet Mask as your computer.
Click “Save”.
3. Reboot the MFP Server.
11
1 1.
Troubleshooting