AirLive DS-100 v2 - Manual (Page 26)

4. Web Management in Device Server
AirLive DS-100 v2 User’s Manual
23
4.2.3Operation Instructions
After completing the Hardware Setup and the devices are physically connected, the system
is ready for operation. This section will describe how to operate DS-100 v2 to print out
tickets
for enabled billing plans.
1. Select an enabled billing plan number on DS-100 v2 by PRE (-) button. The numeric
LED display on the center of the device represents the billing plan number currently
selected.
2. Press ENTER button on DS-100 v2 to create and print out an on-demand account of
the selected billing plan. POS PRINTER will print out the ticket with the text format
(Without background image) configured on your Gateway/Controller in Ticket
Customization.
*Note:
If you are unable to get a ticket printout after pressing ENTER button, please check
if the selected plan is enabled.