AirLive DS-100 v2 - Manual (Page 21)

4. Web Management in Device Server
AirLive DS-100 v2 User’s Manual
18
Step3:
Change DS-100 v2 Network Settings if necessary so that the IP address of
DS-100 v2 is under the same subnet as the Gateway/Controller’s interface, which
DS-100 v2 will be connected to. Click Apply to save the settings.
4.2.2 Gateway/Controller
WIAS-3200N v2 provides wireless and wired network service with On-Demand
authentication for clients in Service Domain. Administrator can select Billing Plan on each
WP-610T/WP-620T Thermal Printer. If Billing Plan is enabled, the Thermal Printer can
generate On-Demand's tickets. The clients are required to get authenticated successfully
before access the Internet.
Configuration Steps:
Step 1. Create Billing Plans.
Click Service Domain > Authentication > On-Demand > Billing Plans Setup, the Billing