AirLive BU-3026-IVS User Manual

Page 64

7. Appendix

AirLive BU-3026/BU-3026-IVS User’s Manual

elect

Sensitivity

to set the detection sensitivity level. Higher sensitivity will make it

easier to detect and less objects missing, but more misjudgments.

Sel

ect People / Vehicles / Anything as the detected objects.

Select Calibration (People or Vehicle Object Sizes)

The minimum and maximum

boundary of objects can be specified to improve the detection accuracy. The width
and length values must be at least 6 pixels. If any false detection caused by smaller
objects, you can try to increase the minimum size.

‐ Min. Size of Calibration: The width and length values must be 6 pixels at least. If any

false detection caused by smaller objects, you can try to increase the minimum size.

‐ Max. Size of Calibration: It has to be larger than the minimum size and half the frame

size is the most.

Set Event Action: Go to the Event Schedule to Add or Edit the IVS event.

Up to4 zones can be specified when click the Add Zone function. Left click to add the

point and 15 points at most can be used in each zone.

Select Delete Zone/All to delete the zones.

Select Enable/Disable to allow the trigger or not.

Statistics Chart Display: Here will show the detection result of e-Fence.

This manual is related to the following products:

BU-3026