AirLive BU-3026-IVS - Manual (Page 34)

6. Configuration
AirLive BU-3026/BU-3026-IVS User’s Manual 30
‐ Mode: There are three modes (Indoor / Outdoor / Auto) to fit your environment
‐ Auto White Balance: You can enable or disable the function.
‐ IR-Cut: The camera can automatically or manually remove the IR-cut filter to let IR
light into the sensor during low light conditions.
Auto:
Photo Sensor: The camera automatically removes the filter based on the photo
sensor.
Manual: User can use this function to determine the threshold, and the camera
switches between day mode and night mode based on this specified
threshold.
Always ON:
The camera switches on the IR cut filter at all times to block infrared light.
Always OFF:
The camera switches off the IR cut filter at all times for the sensor to accept
infrared light.
Schedule:
The camera switches between day mode and night mode based on a specified
schedule. Enter the start and end time for day mode.
‐ ICR Delay Time: Select from 5s to 30s.