AirLive BU-3026-IVS - Manual (Page 28)

6. Configuration
AirLive BU-3026/BU-3026-IVS User’s Manual 24
- Audio DSCP: Assign the DSCP (Diff Serv Code Point) of the stream audio from the
camera by setting the value from 0 to 63.
3. IP Filter
The IP Filter allows the administrator of the camera to restrict the users within a certain
range of IP addresses to access into the camera. Select the Enable Filter option and
assign the range of IP addresses that are allowed to access into the camera in the
Accept IP Address field; or assign the range of IP addresses that are blocked to
access into the camera in the Deny IP Address field.
For example, when you enter 192.168.0.50/192.168.0.80 in Start/End IP Address of
Accept IP Address and then click Add, the user whose IP address located within
192.168.0.50 ~ 192.168.0.80 will be allowed to access into the camera. On the other
hand, if you enter the IP range in Start/End IP Address of Deny IP Address and then
click Add, the user whose IP address located within the range will not be allowed to
access into the camera.