ACE BACKSTAGE Super Stage Pocket User Manual

Data sheet, Ace backstage co., inc, Stage pocket systems

ACE BACK

STAGE CO., IN

CLEAR C

DMX12

PUSH

Horizontal Slant

UL Listed

compliance

Standard

LISTED

UL Listed

Connectrix

System

Ready

“Connectrix”

ACE BACKSTAGE CO., INC.

STAGE POCKET SYSTEMS

24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355

Tel: 661-295-5760 | Fax: 661-295-1122

Email: [email protected] | Web: www.acebackstage.com

DATA SHEET

Stage Pocket

Data Spec Sheet

Revision: 1A.132-232

Model Numbers:

#132-xxyy, #232-xxyy (xx= Lid Type and yy= Finish Type)

Model Name:

Super Stage Pocket - Super Capacity Horizontal Panel Pocket

Model Description: Pocket with brushed metal or powder coat finish, choice of lid, with optional panel(s) and connectors

Model Name: SUPER STAGE POCKET

GENERAL DESCRIPTION

Ace Backstage Co. Inc.’s Super capacity Horizontal Panel

Pockets offer a rugged welded steel construction and du-

rable finishes with a detachable trim bezel-lid, horizontal

panel mounting brackets with included back boxes. Super

Pockets provide more than twice the capacity of our vertical

pockets in the same space.

The Super Pocket is the same size as the ACE Full Pocket

with Back Box except it provides almost 3 times the con-

nectivity capacity using a HORIZONTAL PANEL design.

The basic construction incorporates 3 sub-assemblies. A

unique Trim Bezel-Lid assembly with spring loaded blind

hinge pins and hinged cableway slot closure that mounts

directly to the ACE #102BBX Back Box. Assembled in the

Back Box is a set of panel mounting and AC barrier isola-

tion raceway brackets (#BRK102).

The Trim Bezel-Lid is a heavy duty welded 11 gauge (.120

thick) steel, solid brass or solid stainless steel assembly.

Each Bezel is available with either a flat flush standard lid

(SL) or a recessed carpet lid (CL). Steel Bezels with flush

flat lids come in 3 oven cured powder coat decorator fin-

ishes: antique silver vein, antique copper vein or textured

black. Solid Brass and Stainless Steel have a brushed fin-

ish and are available on a special order basis. The in-floor

appearance is the same as the Full Pocket.

The HORIZONTAL PANEL in the Super Pocket is designed

for high capacity connectivity. In less than one square foot

(10.5”x10.5”) the Super Pocket provides abundant panel

space for up to 25 connectors* and a barrier isolated race-

way ready for 2 duplex electric outlets (multiple circuits).

This large connectivity capacity is possible using a Hori-

zontal Panel Design and a set of panel mounting and A.C.

barrier isolation raceway brackets. Generous combination

conduit knockouts on four sides provides in-out-and-thru

ways for both low voltage and AC electric cabling.

The Super Pocket panel system is unique and flexible. Use

any combination of standard ACE pre-punched panels de-

signed for the Full and/or Half Pockets, or choose a custom

layout made to order aluminum “Connectrix” or alumi-lam

panel. Generous clearances above and below the panel(s)

permit easy termination and access to an array of audio,

video, data, communication and control connections

FEATURES

• EXTRA LARGE CAPACITY: The Super Stage Pocket

accomodates #PNL-100 Series Panels, #PSW-100 Series

Panels, #PNL-120 Series Panels, and #PNL-140 Series

Panels in an interchangeable multi-panel system making for

easy custom configurations. One (1) optional #PNL-140

Series Panel, four (4) optional #PNL-100 Series Panels or

two (2) optional #PNL-120 Series Panels will mount up

to 24 “CONNECTRIX”, Neutirk®, and/or Switchcraft® type

connectors*. Four (4) optional #PSW-100 Series Panels

will mount up to 24 Switchcraft® type connectors.

• DURABLE CONSTRUCTION: Welded steel construction

of Super Stage Pocket Lid, Mounting Flange, and Pocket

Body resist bending under even the most severe stage

loads. The Trim Bezel Lid and Mounting Flange is made

from 1/8” (nominally 11 ga. (.120”)) thick CRS steel while

the Back Box Pocket Body is made from 14 ga. (.071”)

thick CRS steel.

• SPRING LOADED HINGE PINS: Removable spring

loaded hinge pins permit easy exchange of lids for Carpet

Lid (CL), Locking Lid (LL), Standard Lid (SL) and other

custom application lids.

• CABLE WAY SLOTS: Generous 3/8” x 8” Cable Way Slots

permit easy cable exit from pocket(s), even for large gauge

cables. A Cable Way Slot Closure channel closes the slot

when not in use.

• EASY INSTALLATION: Easy installation into 10” x 10”

square cutout in stage floor. Open easy access from the

top of the stage pocket allows simple connector/panel

terminations.

• DECORATOR FINISHES: Scratch/wear resistant finish,

oven cured powder coat electro-static applied inside and

1 of 6