2N StarGate/BlueTower v5.4 User Manual
Page 91
91
Parameter
value
CLIP to
VoIP/PRI 1
Note
Null
420261301500
No change in CLIP
+
+420261301500
Add + before CLIP beginning
00
00420261301500
Add 00 before CLIP beginning
––
0261301500
Remove two first digits from CLIP beginning
–––99
99261301500
Remove first three digits and add 99 before CLIP
beginning
Looping of voice message – set the voice message playing time.
Send CLIP from GSM/UMTS to VoIP/ISDN
Transfer CLIP from GSM/UMTS – enable/disable the function.
Separating char – set the separator for the SIM card CLIP and ID of the
extension to be called.
Modify – modify the extension ID.
Caution
The
service must be supported
Send CLIP from VoIP to GSM
by the GSM/UMTS provider’s network. Otherwise, the call may
be rejected by GSM/UMTS.
Others
Time to keep CLIP in table – set the record keeping time for AutoCLIP routing.
Add record only for unconnected call – enable storing of unconnected
outgoing calls in the AutoCLIP table only.
Delete record for connected answer – enable deletion of an AutoCLIP record
in the case of successful CallBack.
Skip DTMF for numbers not in CLIP Routing table – enable this option to set
DTMF to the incoming calls only whose CLIP is included in the CLIP Routing table.
Skip list of called numbers after failed call to wanted number – enable this
function to disable forwarding of incoming calls to the numbers included in the
List of called numbers if rejected after DTMF.
Auto end to CallBack request – enable that the incoming call whose CLIP
meets the CallBack settings will be rejected. If not, the call will be ignored. The
CallBack function will be retrieved after call end in both the cases.
List of Called Numbers
List of numbers to be dialled if DTMF dial–in was not made. Search the table from top
to bottom. If the called user is inaccessible, use the following table record
.