2N StarGate/BlueTower v5.4 User Manual

Page 158

158

Test Calls

AT!SPxx=dial

Initiates testing call from AUX interface (xx is the called interface):
1..15, 17-31 B-channel
32-rotating B-channel

AT!SGxx=dial

Initiates testing call from AUX interface (xx is the called interface):
00..31 GSM module
32- to GSM via GSM module according to call prefix

AT!WPxx

Connects the following call from interface xx to AUX interface
1..15, 17-31 from B-channel No.
32 first incoming calls from ISDN

AT!WGxx

Connects the following call from interface xx to AUX interface
00..31 from GSM No.
32 first incoming calls from GSM

AT!D

Terminates call on AUX interface

Trace

Trace can be activated for only one session at a time.

AT!RE

Start tracing of error messages on active interface

AT!Lx

Start tracing of LAN & Telnet on layer xx=2 – Layers
IP,TCP,Telnetx=3 – Layers TCP, Telnetx=4 – Layer Telnet

AT!Rx

Start tracing of ISDN PRI & GSM on layer xx=1 – Layers 1,2,3,4x=2
– Layers 2,3,4x=3 – Layers 3,4x=4 – Layer 4

AT!RR

Start tracing (AT!R2) to COM1 interface

AT!RX

Stop tracing (AT!R2) to COM1 interface