Ethernet configuration, Login configuration, Web configuration – 2N BRI Lite/Enterprise v1.2 User Manual
Page 66
66
User – registration user name for VoIP.
Password – registration user password for VoIP.
GSM number (CLIP) – user SIM card CLIP.
Follow me function – enable/disable call forwarding to the user mobile station
(according to CLIP).
SMS at no answer function – enable/disable sending of SMS on missed calls.
Ethernet configuration
Use this window to set the gateway Ethernet interface.
Use DHCP – enable/disable the DHCP client function for
gateway.
2N BRI
®
IP address – fixed IP address (v4) for the
gateway Ethernet interface.
2N BRI
®
Subnet mask – network mask for the
gateway Ethernet interface.
2N BRI
®
Default gateway – IP address (v4) of the IP gateway in the Ethernet.
Caution
Saving wrong values, e.g. DHCP enable, may result in making
the
gateway configuration part inaccessible. In that
2N BRI
®
case, reset the GSM gateway to factory values; refer to
.
Tip
If the gateway is in the DHCP client mode, the current values
obtained from the DHCP server are displayed in the IP address,
Subnet mask and Default gateway items.
Login configuration
Use this window to set the access password and name for the
gateway web
2N BRI
®
interface. Use the same access data for Telnet connection too.
Caution
Change the user name and password during your
gateway
first
configuration to avoid unauthorised access to your gateway
configuration!
Web configuration
Set additional parameters for web access to the GSM gateway.
Auto logout – set the count of minutes in which the user will be logged out
automatically.
Enable web session lock – one Admin user may be connected to the GSM
gateway at one time. If another duly authorised user tries to log in, the
preceding session will be terminated automatically. If you activate this function,
no automatic logout will occur and any other access attempts will be blocked.
Simple login form – activate this item to change the graphic appearance of the
login window into an anonymous look. This function is recommended for direct
connection of the GSM gateway to the Internet.
Use SMS user for SMS operations on the web – enable/disable a user authorised
to send/receive SMS messages only.