Disa message, Disa recording via pc and web interface – 2N BRI Lite/Enterprise v1.2 User Manual

Page 36

DISA Message

With DISA activated and DISA welcome note recorded, the message is played to every
incoming call whose CLIP is not included in the AutoCLIP table. After playing, the
gateway waits for the first DTMF digit for the time period defined in the Incoming GSM

table. Having received the count of digits defined in the

calls – DTMF dial timeout

Inco

parameter, the gateway activates connection to

ming GSM calls – Minimum DTMF digits
the SIP proxy or telephone via the port included in the

table with the

ISDN parameters

DTMF–received number. You can upload the DISA message using the GSM gateway
web interface.
Or, you can record the message using your PC as

and load it into the gateway

disa.wav

using the configuration program via the web interface.

DISA Recording via PC and Web Interface

The DISA voice message parameters for PC recording are as listed below: maximum
duration of 65s, compression according to ISDN A–law, mono, sampling frequency of
8kHz. Name the file Disa.wav and load it via the

Gateway control – Voice messages

b interface into the gateway.

DISA voice message parameters

Sound format:

WAV

Sampling frequency:

8 kHz

Channels:

1 mono

Codec:

ISDN A–law