2N Helios IP Video Kit - Manual (Page 10)

10
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2.1 Mechanical Installation
Mounting Types
Refer to the table below for a list of mounting types and necessary components. Make
sure that the installation site is not exposed to flowing or condensed water.
Wall mounting
Use the proper wall mounting screws
and dowels (not included in the
delivery).
Hang the device on the wall using the
cover bottom holes.
DIN rail mounting
Mount the device to a standard TS 35
DIN rail.
The recommended minimum DIN rail
length is 14cm.
PCB mounting (for Part No.
9154101 only)
Use 4 – 6 distance columns and
proper screws (not included in the
delivery) to mount the PCB to the
support.
Fix the distance columns as shown in
the figure.