2N Omega 48 - Basic Services v1.0 - Manual (Page 48)

2N
®
- OMEGA 48
Basic services
User manual – Basic services
www.2n.cz
47
2.6. Mobility Extension – active calls
An actively initiated Mobility Extension call is such that you are calling the PBX,
an external line (typically a GSM gateway) from a cellular telephone (typically)
whose GSM number is allocated to one of the internal lines as Mobility Extension:
Call the number of the PBX external line (typically a GSM
gateway)
Depending on the administrator settings you may be asked to
enter a password (the same as the password of the respective
internal line), otherwise wait until you hear the dialing tone and:
(————)
nn
Dial the number of a PBX internal subscriber
Speak
Hang up to end the call, or dial
“FLASH” simulation
nn
Dial the number of an internal PBX subscriber or the number of a
service
Speak or
Listen to the service execution message
Hang up or dial
“Withdrawing from the call”
nn
Dial the number of another internal PBX subscriber or the
number of a service
Speak or
Listen to the service execution message
Hang up or………