Omega 48 basic services – 2N Omega 48 - Basic Services v1.0 User Manual
Page 36

2N
®
- OMEGA 48
Basic services
User manual – Basic services
35
2. Mobility Extension
Mobility Extension function (hereinafter ME) enables telephones (preferably GSM
telephones to share internal line services (switching, dialing PSTN,..) outside the
PBX.
Simply put, if an internal line rings it enables simultaneous ringing of e.g., cellular
telephone, and if a call is answered with the cellular telephone you can do anything
with the call what you could on the respective internal line. The fixed telephone
connected to the PBX stops ringing at that moment. In the case of an incoming call
from the respective cellular telephone the tone one hears in the handset is the set
PBX dialing tone that the user knows when picking up the handset on the internal
line, and the same tasks can be carried out as if picking up the handset on the
internal line (calling another VL, calling PSTN,…).
The primary setup is made by the PBX administrator by setting on the specific
internal line the number (preferably a cellular telephone number), to which calls
should be made if the Mobility Extension service is activated. After this, using this
service is fully up to the user.
2.1. Mobility Extension – permanent
If you want to use the service permanently without time limit (DAY/NIGHT mode):
Pick up the handset and wait until you hear the internal
dialing tone
(————)
With a tone telephone set:
If you want to activate ME right after the ringing on the
internal line starts
or
If you want to activate ME after the first ring after the
ringing on the internal line starts
or
to
If you want to activate ME after the second to eighth ring
after the ringing on the internal line starts
With a pulse telephone set:
If you want to activate ME right after the ringing on the
internal line starts
or
If you want to activate ME after the first ring after the
ringing on the internal line starts