Echo 74824 Owners Manual v.3 - Manual (Page 7)

Page 5 6" & 8" Bear Cat Chipper Operator’s Manual
8. If needed, always use an approved fuel container. Keep
open flames, sparks, smoking materials, and other
sources of combustion away from fuel.
9. Do not operate this machine if you are under the influ-
ence of alcohol, medications, or substances that can
affect your vision, balance, and judgement. Do not op-
erate if tired or ill. You must be in good health to oper-
ate this machine safely.
10. Wear safety glasses at all times while operating this
machine.
11. Use only in daylight or good artificial light.
12. Never use without proper guards in place.
13. Avoid wearing loose fitting clothing. Never operate this
machine wearing clothing with drawstrings that could
wrap around or get caught in the machine.
14. Check that all screws, nuts, bolts, and other fasteners
are properly secured before starting the machine. Check
all screws, nuts, bolts, and other fasteners for proper
tightness to ensure everything is in proper working con-
dition once every 8 hours of operation.
15. Keep all guards, deflectors, and shields in place and in
good working condition.
16. Do not transport or move machine while the machine is
running.
1.3 OPERATION SAFETY
1. Keep your body and clothing away from any moving
part of the machine.
2. Restrain pieces of metal, rocks, bottles, cans, and for-
eign objects from entering the machine.
3. Shut off machine immediately if the cutting mechanism
strikes any foreign object or the machine starts making
an unusual noise or vibrating. Allow the machine to
stop completely. After machine stops:
A. Inspect for damage.
B. Replace or repair any damaged parts.
C. Check for and tighten any loose parts.
4. Stand clear of the discharge area when operating this
machine.
5. Keep your face and body away from the feed opening.
6. Do not climb on machine when operating. Keep proper
balance and footing at all times.
7. Keep the machine clear of debris and other accumula-
tions.
8. Set up your work site so you are not endangering traffic
and the public. Take great care to provide adequate warn-
ings.
9. Ensure debris does not blow into traffic, parked cars, or
pedestrians.
10. Check the bolts for correct torque every 8 hours of op-
eration. (see section 7.2)
11. If the machine becomes clogged, shut off engine and
allow machine to stop completely, before clearing de-
bris.
DANGER
Keep hands, feet and clothing out of inlets and discharge
openings while machine is operating to avoid serious per-
sonal injury.
Material can shift suddenly and cause serious injury or
death. Wear eye and hearing protection.
CAUTION
SAFETY