Warning – Echo 76628S User Manual
Page 21
PN 14295-00 R
19
OPERATION
4.7 FeeD roller Bottle jaCk
1. Move throttle to slowest position.
2. Move chipper engagement to the engine start posi-
tion.
3. Let machine idle for a few seconds.
4. turn key to off position.
5. Allow machine to come to a complete stop.
Allow the machine to come to complete stop before
inspection or servicing.
Fig. #19, Bottle jack
The feed roller bottle jack is used to raise the feed roller if
chipping material becomes wedged in the feed roller. The
jack will raise the feed roller and remove the tension on
the chipped material.
Turning the check valve clockwise will engage the pump of
the jack. Once the jack is engaged pumping the handle will
raise the jack. Turning the check valve counterclockwise
will disengage the pump and lower the jack.
WarnInG
4.8 stoPPInG
- GT-225 (32 pages)
- SRM-210 (32 pages)
- SRM-225 (24 pages)
- SRM-225 (44 pages)
- PAS ARTICULATING HEDGE CLIPPER ATTACHMENT PAS-2601 (20 pages)
- 670-200 (20 pages)
- PE-2000 Type 1/1E (30 pages)
- X7502026001 (36 pages)
- SB (56 pages)
- PAS RAPID LOADER 99944200610 (16 pages)
- 99944200610 (24 pages)
- SRM-261SB (16 pages)
- SRM-210SB (32 pages)
- PAS-230 (24 pages)
- PAS-230 (32 pages)
- PAS-230 (24 pages)
- PAS-260 (42 pages)
- PAS-261 (25 pages)
- 2410 - Type 2E (32 pages)
- GT-201 (28 pages)
- POWER PRUNER PPT-2400 (16 pages)
- HC-155 (32 pages)
- HC-155 (36 pages)
- Trimmer (20 pages)
- SRM - 265U (36 pages)
- HC-150 (28 pages)
- HC-235 (32 pages)
- HC-225 (32 pages)
- BLADE CONVERSION KIT 231 (8 pages)
- TC-2100 (28 pages)
- SRM-400 (20 pages)
- SRM - 260S (28 pages)
- 54 (4 pages)
- HCA-2400 (36 pages)
- CULTIVATOR PRO ATTACHMENT 99944200513 (16 pages)
- RM-5000 (68 pages)
- SRM-265T (44 pages)
- SHC-210 (28 pages)
- 2110 (37 pages)
- PE-3100 Type 1/1E (28 pages)
- SRM-265S (42 pages)
- SRM - 230U (32 pages)
- SRM-225I (36 pages)
- 99944200553 (16 pages)
- 99944200553 (24 pages)