Echo 7812086 Owners Manual v.2 - Manual (Page 17)

Bear Cat Owners Manual 13
Section
5.1 MAINTENANCE SCHEDULE
The items listed in the service and maintenance schedule are to be checked, and if necessary, corrective action taken. This schedule
is designed for units operating under normal conditions. If the unit is operating in adverse or severe usage conditions it may be
necessary for the items to be checked and serviced more frequently.
SEE ENGINE OWNERS MANUAL FOR FURTHER MAINTENANCE AND TROUBLESHOOTING INFORMATION.
SERVICE AND MAINTENANCE SCHEDULE
FREQUENCY
COMPONENT
MAINTENANCE
REQUIRED
BEFORE
EACH
USE
EVERY
8
HRS
EVERY
25
HRS
EVERY
50
HRS
EVERY
100
HRS
EVERY
200
HRS
EVERY
250
HRS
EVERY
500
HRS
EVERY
1
YEAR
ENGINE OIL CHECK/FILL
HYDRAULIC OIL CHECK/FILL
FUEL TANK CHECK/FILL
ENGINE COOLANT CHECK/FILL
BATTERY
CONNECTIONS
CHECK
NUTS & BOLTS CHECK
CHIPPER BLADES
CHECK, SHARPEN
IF NEEDED 3
BELT/PULLEY
ALIGNMENT
CHECK
DRIVE BELT CHECK
HYDRAULIC
DRIVE BELT
CHECK
TIRE PRESSURE CHECK
ENTIRE MACHINE CLEAN
ROTOR BEARING GREASE
ENGINE OIL CHANGE 1, 4, 5
COOLING SHROUDS CLEAN 1
PRE-CLEANER
ELEMENT
CLEAN 1
AIR INTAKE CLEAN 1
HYDRAULIC OIL FILTER REPLACE 4
AIR CLEANER CHECK & CLEAN 1
OIL FILTER
CARTRIDGE
REPLACE 4
FUEL FILTER
CARTRIDGE
REPLACE
STARTER DRIVE SERVICE 2
SOLENOID SHIFT
STARTER
DISASSEMBLE AND
CLEAN 2
AIR CLEANER REPLACE
1 Perform more frequently in dusty, dirty or severe usage conditions.
2 Have a Kubota engine service dealer perform this service.
3 It is a good sign that your chipper blades need sharpening when material stops self feeding.
4 Perform after the first 50 hours of operation.
5 Refer to engine owners manual for additional maintenance schedules.
Service & Maintenance 5