Echo CH9540H Owners Manual v.7 - Manual (Page 8)

PTO CHIPPERS 4
SAFETY
PN 12174
PN 12169
3 PN 12172
4
PN 12173
5 PN 12174
6
PN 12175
7
PN 12168
2
PN 14942-00
1
PN 12250
8
1.8 SAFETY DECALS
9
10
PN 18983-00
PN 32109-00
(MODELS CH9540H AND
CHF9540H ONLY)
See Section 1.9 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.
CONTACT WITH ROTATING DRIVELINE
CAN CAUSE DEATH. DO NOT OPERATE
WITHOUT ALL DRIVELINE, TRACTOR
AND EQUIPMENT SHIELDS IN PLACE.
ENSURE THE DRIVELINE IS SECURELY
ATTACHED AT BOTH ENDS AND
DRIVELINE SHIELDS THAT TURN FREELY ON THE DRIVELINE
ARE IN PLACE.
KEEP HANDS AND FEET OUT OF INLET AND
DISCHARGE OPENINGS WHILE MACHINE IS
OPERATING TO AVOID SERIOUS PERSONAL
INJURY. STOP AND ALLOW MACHINE TO COME
TO A COMPLETE STOP BEFORE CLEARING
OBSTRUCTIONS.
READ AND UNDERSTAND THIS OWNER/
OPERATORS MANUAL. BE COMPLETELY
FAMILIAR WITH THE CONTROLS AND
THE PROPER USE OF THIS EQUIPMENT.
OBTAIN AND WEAR SAFETY GLASSES
AND USE HEARING PROTECTION AT
ALL TIMES WHEN OPERATING THIS
MACHINE.BEFORE INSPECTING OR
SERVICING ANY PART OF THIS MACHINE,
SHUT OFF POWER SOURCE, REMOVE
THE KEY, DISCONNECT SPARK PLUG
WIRE FROM SPARK PLUG AND MAKE
SURE ALL MOVING PARTS HAVE COME
TO A COMPLETE STOP.
DO NOT OPERATE THIS EQUIPMENT IN
THE VICINITY OF BYSTANDERS. DO NOT
ALLOW CHILDREN TO OPERATE THIS
EQUIPMENT. ALWAYS STAND CLEAR OF
DISCHARGE AREA WHEN OPERATING
THIS MACHINE. KEEP FACE AND BODY
AWAY FROM DISCHARGE AREAS.
CHECK BLADE BOLTS FOR PROPER
TORQUE AFTER EVERY 8 HOURS
OF OPERATION. CHECK BLADES
AND ROTATE OR RESHARPEN DAILY
OR AS REQUIRED TO KEEP BLADES
SHARP. REFER TO OWNERS MANUAL
FOR INSTRUCTIONS. FAILURE TO DO SO MAY CAUSE POOR
PERFORMANCE, DAMAGE OR PERSONAL INJURY AND WILL VOID
THE MACHINE WARRANTY.
FEED ROLLER SUPPORT MUST BE
SECURED IN THE UP POSITION
PRIOR TO SERVICING CHIPPER
FEED AREA. THE FEED ROLLER
CAN FALL AND CAUSE SEVERE
BODILY HARM. CONSULT OWNERS
MANUAL FOR PROPER METHOD OF SECURING FEED ROLLER
SUPPORT. LOWER FEED ROLLER BEFORE OPERATING
CHIPPER.
CAREFULLY READ THE USER MANUAL BEFORE 'ACTIVATION. IF
THE USER MANUAL WAS NOT INCLUDED WITH ANY QUESTIONS
OR CALL +1-701-282-5520.
KEEP HANDS AND FEET OUT OF INLET
AND DISCHARGE OPENINGS WHILE
MACHINE IS OPERATING TO AVOID
SERIOUS PERSONAL INJURY. STOP
AND ALLOW MACHINE TO COME
TO A COMPLETE STOP BEFORE
CLEARING OBSTRUCTIONS.
DO NOT OPERATE MACHINE WITHOUT
SHIELDS IN PLACE. FAILURE TO DO SO MAY
CAUSE SERIOUS INJURY OR DEATH.
DO NOT OPERATE THIS EQUIPMENT
IN THE VICINITY OF BYSTANDERS.
DO NOT ALLOW CHILDREN TO
OPERATE THIS EQUIPMENT. ALWAYS
STAND CLEAR OF DISCHARGE AREA
WHEN OPERATING THIS MACHINE.
KEEP FACE AND BODY AWAY FROM
DISCHARGE AREAS. ROTATE THE
DISCHARGE TUBE OVER THE
HITCH BEFORE TOWING AND LOCK
SECURELY IN PLACE.