BURY CC 9068 APP USER Manual - Manual (Page 40)

40
Operating guidelines
Transferring calls is to be understood as being the acceptance of a call during a telephone call and
alternating between two conversations.
Note:
Please remember that your range of functions can vary depending on the type of mobile X
phone. Please find the relevant details in the instructions manual for your mobile phone.
If you receive another call during an active telephone conversation, you will be informed of it via an
acoustic signal. You now have the option of either rejecting the call (the
red symbol ) or accepting the
call (the green symbol ). If you accept the call your previous call will be put on hold. Your conversa-
tional partner will be indicated with .
You now have the following options:
1. Using swap you can switch between your different callers.
2. You can reject the active call.
3. You can reject the held call.
4. You can activate the private mode.
5. You can activate the mute.
6. You can activate the keypad.
19. Transferring calls
20. Conference mode
The hands-free car kit provides you with the possibility of merging up to seven conversations to create
a conference. This means that all participants can talk to each other at the same time.
If you receive a further call during an active telephone conversation, you can merge both conversa-
tions into a conference. To this end select the merge command (conference is shown in the dis-
play).
During a conference, you have the following options:
1. You can reject the active call. (the conference ends)
2. You can activate the private mode.
3. You can activate the mute.
4. You can activate the keypad.
If you receive a further call during a conference, you can add this to the conference using the add to
conference command or switch between the conference and conversational partner using the swap
command.
Note:
The current mobile telephone networks only permit the use of a maximum of two X
lines.
If you are using both lines and you receive a further call, you have the following options:
- Reject call
- Accept call
->Your active connection will be ended and replaced by the new connection.