BURY CC 9068 APP USER Manual - Manual (Page 26)

26
Operating guidelines
Dial number
Delete group
Dial
Delete last
Delete all
Phonebook
Play list
Dial number
It makes sense to divide telephone numbers in short number blocks of
3-4 digits and to say them this way. At each break, the HFCK repeats
the number block and waits for the next number block. After the signal
tone you can respectively continue your announcement.
Enter the area code. Enter the first numbers of the actual telephone
number. Enter the remaining numbers of the actual telephone number.
When you have entered the last number block of the telephone number,
you can check the complete telephone number once again with the
voice command „PLAYBACK“.
Here are some more commands:
The complete entry will be deleted, or the previous entry.
The last digit is deleted.
A telephone connection is being established.
The last number block will be deleted.
Phonebook
Since your phonebook is scanned with the first coupling of your mobile
phone with the system, it is immediately available to you and is stored
until you delete the mobile phone from the phone list. The telephone
book data can of course only be seen or changed by you.
The entire list is read aloud to you. With „STOP“ you can stop the proc-
ess and select the respective entry. With „NEXT“ or „NEXT PAGE“
and „PREVIOUS“ or „PREVIOUS PAGE“ you can navigate in the list.
With „DIAL“ the telephone connection will be made. You can also jump
directly to one of the entries shown by activating the entry number.
E.g.:
„SELECT ENTRY THREE“.