JLG 3246ES Operator Manual - Manual (Page 22)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION & INSPECTION
2-2 – JLG Lift – 3121165
2.2 PREPARATION, INSPECTION, AND MAINTENANCE
The table below covers the periodic machine inspections and maintenance recommended by JLG Industries, Inc. Consult local reg-
ulations for further requirements for aerial work platforms. The frequency of inspections and maintenance must be increased as
necessary when the machine is used in a harsh or hostile environment, if the machine is used with increased frequency, or if the
machine is used in a severe manner.
Table 2-1. Inspection and Maintenance Table
Type Frequency
Primary
Responsibility
Service
Qualification
Reference
Pre-Start Inspection Before using each day; or
whenever there’s an Operator change. User or Operator User or Operator Operation and Safety Manual
Pre-Delivery Inspection
(see note below) Before each sale, lease, or rental delivery. Owner, Dealer, or User Qualified JLG
Mechanic
Service and Maintenance Manual and
applicable JLG inspection form
Frequent Inspection In service for 3 months or 150 hours, whichever comes
first; or Out of service for a period of more than 3
months; or Purchased used. Owner, Dealer, or User Qualified JLG
Mechanic
Service and Maintenance Manual and
applicable JLG inspection form
Annual Machine
Inspection
(see note below) Annually, no later than 13 months from the date of
prior inspection. Owner, Dealer, or User Factory Trained
Service Technician
(Recommended)
Service and Maintenance Manual and
applicable JLG inspection form
Preventative Maintenance At intervals as specified in the Service and Mainte-
nance Manual. Owner, Dealer, or User Qualified JLG
Mechanic
Service and Maintenance Manual
NOTE: Inspection forms are available from JLG. Use the Service and Maintenance Manual to perform inspections.
JLG INDUSTRIES, INC. RECOGNIZES A FACTORY-TRAINED SERVICE TECHNICIAN AS A PERSON WHO HAS SUCCESSFULLY COMPLETED THE JLG SERVICE
TRAINING SCHOOL FOR THE SPECIFIC JLG PRODUCT MODEL.
NOTICE