JLG 3246ES Operator Manual - Manual (Page 72)

SECTION 4 - MACHINE OPERATION
4-22 – JLG Lift – 3121165
2-2 Platform Controls
DTC FAULT MESSAGE DESCRIPTION CHECK
221 FUNCTION PROBLEM - HORN PERMA-
NENTLY SELECTED The horn switch was closed during power-
up in platform mode. • Check if the horn switch is damaged, obstructed or jammed.
Refer problem to a qualified JLG mechanic.
222 FUNCTION PROBLEM - INDOOR / OUT-
DOOR PERMANENTLY SELECTED The indoor / outdoor (zone A / zone B)
switch was closed during power-up in plat-
form mode. • Check if the indoor/outdoor (zone A / zone B) capacity switch is damaged,
obstructed or jammed.
Refer problem to a qualified JLG mechanic.
223 FUNCTION PROBLEM - DRIVE & LIFT
ACTIVE TOGETHER The drive and lift inputs are closed simulta-
neously in platform mode. • Check drive/lift switch for visible damage.
Refer problem to a qualified JLG mechanic.
224 FUNCTION PROBLEM - STEER LEFT
PERMANENTLY SELECTED The steer left switch was closed during
power-up in platform mode. • Check if the steer left switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
225 FUNCTION PROBLEM - STEER RIGHT
PERMANENTLY SELECTED The steer right switch was closed during
power-up in platform mode. • Check if the steer right switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
226 ACCELERATOR FAULTY - WIPER OUT OF
RANGE There is a problem with the joystick. • Center joystick and check to see if a power cycle will clear DTC.
Refer problem to a qualified JLG mechanic.
227 STEER SWITCHES FAULTY The steer left and steer right inputs were
closed simultaneously. • Check if the steer switches are damaged, obstructed or jammed.
Refer problem to a qualified JLG mechanic.
228 FUNCTION LOCKED OUT - ACCELERA-
TOR NOT CENTERED The joystick was not centered at power-up. • Release joystick and allow to center.
• Check if the joystick is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
229 FUNCTION PROBLEM - TRIGGER PER-
MANENTLY CLOSED The trigger switch was closed during
power-up in platform mode. • Check if the trigger switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.