JLG 120-SXJ ANSI Service Manual - Manual (Page 12)

SECTION 1 - SPECIFICATIONS
1-2 – JLG Lift – 3121105
Wheelbase
10 ft. (3.05 m)
Ground Clearance
12.5 in. (32 cm)
Gross Weight
100SX - 37,700 lbs. (17,136 kg)
110SX - 41,900 lbs. (19,006 kg)
110SXJ - 41,400 lbs. (18,779 kg)
Max. Ground Bearing Pressure
100SX & 110SXJ - 90 psi (6.3 kg/cm 2 )
110SX - 100psi (7.0 kg/cm 2 )
Drive Speed
3 mph (4.8 km/h)
Gradeability
40%
Turning Radius (Inside)
Axles Retracted - 14 ft. 8 in. (4.47 m)
Axles Extended - 12 ft. (3.66 m)
Turning Radius (Outside)
Axles Retracted - 22 ft. 2 in. (6.76 m)
Axles Extended - 24 ft. (7.32 m)
Tire Size/Type
385/65R22.5 Foam Filled
1.4 PERFORMANCE DATA - 120SXJ
Platform Height
120 ft. (36.58 m)
Horizontal Outreach
60 ft. (18.3 m)
Swing
360° Continuous
Platform Capacity
500 lbs. (230 kg)
Platform Rotator
180° Hydraulic
Jib Range of Articulation
11 ft. (3.35 m) 95 degrees (+15, -80)
Overall Width - Axles Retracted
8 ft. 2 in. (2.49 m)
Overall Width - Axles Extended
10 ft. 10 in. (3.3 m)
Tailswing (Axles Extended)
2 ft. 10 in. (86 cm)
Stowed Height
10 ft. (3.05 m)
Stowed Length (Working)
52 ft. 4 in. (15.95 m)
Stowed Length (Transport)
35 ft. 11 in. (10.95 m)
Wheelbase
10 ft. (3.05 m)
Ground Clearance
14.5 in. (37 cm)
Gross Weight
43,500 lbs. (19,732 kg)
Max. Ground Bearing Pressure
90 psi (6.3 kg/cm 2 )
Drive Speed
3 mph (4.8 km/h)
Gradeability
40%
Turning Radius (Inside)
Axles Retracted - 12 ft. 10 in. (3.91 m)
Axles Extended - 10 ft. 7 in. (3.23 m)
Turning Radius (Outside)
Axles Retracted - 17 ft. 4 in. (5.28 m)
Axles Extended - 18 ft. 10 in. (5.74 m)
Tire Size/Type
445/65R22.5 Foam Filled