JLG X600AJ Operator Manual - Manual (Page 54)

SECTION 4 - MACHINE OPERATION
4-4 – JLG Lift – 3121637
5. When finished operating with the electric engine,
turn off switch (item 1 - opposite side of machine),
unhook the electric AC cord from receptacle (item
2), and disconnect ground discharger cable (item
3), if it was required.
NOTE: At low temperatures start the motor and let it run for a
few minutes, so that the hydraulic oil circulates and
reaches at least 50°F (10°C) before operating the plat-
form.
Electric Engine Starting Procedure - LITHIUM-ION
Machine
1. Set the ON/OFF switch on the lithium-ion battery
pack to the ON position, (0 symbol is OFF, 1 is ON).
2. The electric engine will auto start when a function
is activated at the platform or ground control sta-
tion.
3. Switch the ON/OFF switch on the lithium-ion bat-
tery pack to the OFF position when shutting down
at the end of a work period. (0 symbol is OFF, 1 is
ON)
2
3
1