JLG T500J Service Manual - Manual (Page 15)

SECTION 1 - SPECIFICATIONS
3121200 – JLG Lift – 1-1
SECTION 1. SPECIFICATIONS
1.1 OPERATING SPECIFICATIONS 1.2 CAPACITIES
1.3 ELECTRIC POWER UNIT
1.4 TIRES
Table 1-1. Operating & Towing Specifications
Tongue Weight (ANSI): 350 lbs.(154 kg)
Maximum Allowable Tow Speed:
(Do NOT exceed legal speed limit) 65 mph
(105 kph)
Maximum Work Load (Capacity)
w/Rotator 440 lbs.
(200 kg)
Maximum Work Load (Capacity)
w/o Rotator 500 lbs.
(230 kg)
Maximum Work Load (Capacity)
w/Rotator & Panel Tray 320 lbs.
(145 kg)
Maximum Work Load (Capacity)
w/o Rotator & w/Panel Tray 350 lbs.
(158 kg)
Material Hook Capacity (Optional) 500 lbs.(230 kg)
Accessory Tray Capacity 250 lbs.
*
(114 kg)
Panel Tray Capacity (w/Rotator) 70 lbs. (32 kg)
Panel Tray Capacity (w/o Rotator) 100 lbs.(45 kg)
Swing 410° non-continuous
Max.Vertical Platform Height (Unrestricted) 50 ft. (15.2 m)
Vertical Reach (unrestricted) 50 ft. (15.2 m)
Horizontal Reach
(from centerline of machine)
(from outrigger pad edge)
31 ft. (9.45 m)
25 ft. (7.62 m)
Up and Over Clearance 18 ft. (5.49 m)
Maximum Outrigger Load 2660 (1206.5 kg)
Maximum Ground Bearing Pressure
30.7 psi (2.15 kg/cm 2 )
Maximum Travel Gradeability - ANSI, CSA,
AUS
20%
Maximum Travel Gradeability - CE 15%
Maximum Sideslope - ANSI, CSA, AUS 11°
Maximum Sideslope - CE 8.5°
Max. Hydraulic System Pressure 2950 psi (203 Bar)
Maximum Operating Wind Speed 28 mph (12.5 m/s)
Maximum Horizontal Manual Force 90 lb. force (400 N)
Electrical System Voltage - Electric Machine 24 Volts
Electrical System Voltage - Gas Machine 12 Volts
Gross Machine Weight (Platform Empty)
ANSI Machines/CSA/AUS
4750 lbs. (2155 kg)
Gross Machine Weight (Platform Empty)
CE Machines
5776 lbs. (2620 kg)
*
DO NOT exceed axle rating or GVW rating.
Table 1-2. Capacities
Fuel Tank 1.6 Gal. (6.0 L)
Hydraulic Tank
Filling Volume
Usable Volume
6.9 Gallon (26.1 Liters)
6.3 Gallon (23.8 Liters)
Table 1-3. Electric Power Unit Specifications
@ 740PSI
(51 Bar)
@1500PSI
(103 Bar)
@ 3000PSI
(207 Bar)
Motor Power 3.0 kW 3.0 kW 3.0 kW
Voltage 24 VDC 24 VDC 24 VDC
Amperage 90 140 230
Speed 4000 rpm 3600 rpm 2900 rpm
Short Term
Operation
9 minutes 6 minutes 2 minutes
Intermittent
Operation
28% 19% 10%
Pump Flow Rate 3.0 gpm
(11.3 lpm)
2.7 gpm
(10.2 lpm)
2.2 gpm
(8.3 lpm)
Displacement 0.192 cu.in.
(3.15 cc)
Table 1-4. Tire Specifications
(ANSI) (CE)
Size 225-75-R15 225/75-R16
Load Rating 2540 lbs. @ 60 psi
(1152 kg @ 414 kPa)
3195 lbs. @ 83 psi
(1449 kg @ 575 kPa)
Ply Rating/Load Range 6/D 10/E
Inflation Pressure 65 psi (448 kPa) 60 psi (414 kPa)
Wheel Nut Torque 221 ft. lbs.
(300 Nm)
90-120 ft. lbs.
(122-164 Nm)