Eppendorf A-4-81-MTP/Flex Rotor - Manual (Page 2)

Instructions for use
Rotor A-4-81, Rotor A-4-81-MTP/Flex
English (EN)
Your local distributor: www.eppendorf.com/contact
Eppendorf AG · 22331 Hamburg · Germany
[email protected] · www.eppendorf.com Eppe
ndo
rf
®
and
the Ep
pend
or
f logo
ar
e r
egiste
re
d
tr
ade
m
ar
ks of
Epp
e
ndo
rf A
G.
5810 718
.961-
14/042013
3.2.1 Loading the rectangular bucket

Insert the adapters into the rectangular bucket with the black clamp facing the
"Eppendorf" logo on the bucket.

For tubes with a length of more than 100 mm perform a manual swing-out test with
empty tubes.
The tubes must not come into contact with the rotor cross.
3.2.2 Loading the plate buckets

Observe the maximum load and the maximum height when using stacked plates.
4 Maintenance
4.1 Cleaning
• All buckets, buckets, caps and adapters can be autoclaved (121°C, 20 min).
• The rotor cross is not autoclavable.

Clean the rotor and accessories with a mild cleaning agent.
5 Technical data
Rectangular bucket
500 mL Bucket for concical
tubes 7 × 50 mL MTP/Flex bucket
Max. g-force (rcf) 3 220 × g 3 220 × g 2 900 × g
Max. speed (rpm) 4 000 rpm 4 000 rpm 4 000 rpm
Max. load per bucket
(adapter, vessel and
content)
780 g 7 × 75 g 380 g
Max. centrifugation
radius
18 cm 18 cm 16.3 cm
Max. loading height/
vessel length Please note the data in the operating
manual of the centrifuge.
60 mm