Belkin Home Base F5L049 User Manual

Page 7

Home Base

sections

table of contents

WIreless seTUP

There are three ways to attach your Home Base to your
wireless network:

• Wired Setup of Wireless Mode

• WPS Push Button Configuration

• WPS PIN Configuration

Wired setup of Wireless Mode

note: If Home Base is powered on while plugged into a router, it

will operate as a wired device. To enable Wireless mode, follow

instructions below.

The setup software will help you make Home Base operate as a member

of your wireless network.

1 .

Start by connecting your Home Base to your router.

(You’ll unplug it later.)

2 .

Connect the AC adapter.

3 .

Run the setup software and follow the software’s instructions

to set up the Home Base.

4 .

When offered wireless setup, select a wireless network.

5 .

The setup software will tell Home Base what network you chose.

Follow the software’s instructions to unplug your Home Base from

the router and turn it off and on.

6 .

Your Home Base will then operate as a member of your

wireless network.