Belkin Home Base F5L049 - Manual (Page 10)

8
Home Base
sections
table of contents 1 2 3 5 6 7 8 9 15 10 11 12 13 14
aVaIlaBle DeVICes lIsT
4
The “Available Devices” tab displays a list of USB devices connected
to Home Base and allows you to select devices and specify connection
settings for them. For more information, see the “Device Properties”
section on the next page.
To connect to a USB device, select it and click “Connect”. alternatively,
you can double-click on a device to connect to it . If you double-click
on a disk drive, you can access the contents of the disk drive .
By default, disks attached to Home Base are shared with all computers
on the network. A disk can be unmounted safely by selecting it and
clicking “Disconnect”. A disk that is not mounted can be mounted again
by unplugging and plugging its USB cable back into Home Base.
If someone is using a device you’d like to use, select the device and
click “Request Use”. A message will appear on the user’s computer
notifying him or her that you wish to use this device. They can elect to
make the device available to you, or not.
The “Available Devices” tab displays a list of USB devices connected to Home Base and allows you to select devices and specify
connection settings for them. For more information, see the “Device Properties” section below.