Belkin Home Base F5L049 - Manual (Page 11)

9
Home Base
sections
table of contents 1 2 3 4 6 7 8 9 15 10 11 12 13 14
DeVICe ProPerTIes
5
To access the properties sheet for an individual device, select the device in Control Center and click “Properties”. The properties
sheet allows you to specify general settings such as the name that the device will appear as in the Control Center, whether the
device should automatically connect with a computer via the Home Base as soon as the computer starts, and more.
General Properties The “General” tab of the “Device Properties” screen enables you to
change the name the device appears as in the Control Center and
displays various reference information about the device.
In the “Display Name” field, enter the name of the device as you want
it to appear in the Control Center. The default name is gathered by the
Control Center from the device itself. This default name will always
appear as the USB device name, even if you change the “Display
Name”.
“Device speed” is shown as reported by the particular device. Actual
performance is also affected by other factors such as your network
configuration.
1 . Hi-speed: USB products that carry the “Hi-Speed USB” logo and
support a speed of 480Mbps.
2 . full speed: USB products that carry the basic “Certified USB” logo
and support a speed of up to 12Mbps.
3 . low speed: Supports up to 1.5Mbps.
The “General” tab also contains reference information about the device.