Eppendorf Rolling Cabinet - Manual (Page 21)

Maintenance
Rolling Cabinet
English (EN)
21
6 Maintenance
6.1 Cleaning and disinfection

Clean the accessible surfaces of the rolling cabinet at least once a week or if they
become significantly soiled.

Only rolling cabinets with transformer: Before cleaning/disinfecting, switch off the
rolling cabinet using the mains power switch and pull the power plug.

Cleaning: Use mild cleaning agent.

Disinfection: Use alcohol (ethanol, isopropanol) or alcohol-containing disinfectants.

Wipe the accessible surfaces of the rolling cabinet, accessories and power cable using
a damp cloth.

Thoroughly rinse the non-slip mat after cleaning/disinfection.

Allow the rolling cabinet and accessories to dry thoroughly.

Check the rolling cabinet for damage and corrosion damage.
DANGER! Electric shock as a result of penetration of liquid.

Switch off the device and disconnect the power plug before starting cleaning
or disinfection work.

Do not allow any liquids to penetrate the inside of the housing.

Do not spray clean/spray disinfect the housing.

Only plug the device back in if it is completely dry, both inside and outside.
NOTICE! Damage from the use of aggressive chemicals.

Do not use any aggressive chemicals on the device or its accessories, such as
strong and weak bases, strong acids, acetone, formaldehyde, halogenated
hydrocarbons or phenol.

If the device has been contaminated by aggressive chemicals, clean it
immediately using a mild cleaning agent.
NOTICE! Corrosion due to aggressive cleaning agents and disinfectants.

Do not use corrosive cleaning agents, aggressive solvents or abrasive
polishes.

Do not incubate the accessories in aggressive cleaning agents or disinfectants
for longer periods.
NOTICE! Damage from UV and other high-energy radiation.

Do not use UV, beta, gamma, or any other high-energy radiation for
disinfecting.

Avoid storage in areas with strong UV radiation