Eppendorf Rolling Cabinet - Manual (Page 11)

Safety
Rolling Cabinet
English (EN)
11
Safety precautions only for rolling cabinet with transformer
WARNING! Electric shock due to damage to device or mains cable.

Only switch on the device if the device and mains cable are undamaged.

Only use devices that have been properly installed or repaired.

In case of danger, disconnect the device from the mains supply by pulling the
power plug from the device or the mains socket or, by using the isolating
device intended for this purpose (e.g. emergency stop switch in the
laboratory).
WARNING! Lethal voltages inside the device.

Ensure that the housing is always closed and undamaged so that no parts
inside the device can be contacted by accident.

Do not remove the housing of the device.

Do not allow any liquids to penetrate the inside of the housing.

Do not allow the device to be opened by anyone except service personnel who
have been specifically authorized by Eppendorf.
WARNING! Risk from incorrect supply voltage

Only connect the device to voltage sources which correspond to the electrical
requirements on the name plate.

Only use sockets with a protective earth (PE) conductor and suitable power
cable.
NOTICE! Damage to electronic components due to condensation.
After the rolling cabinet has been moved from a cool to a warmer environment,
condensation may form inside the cabinet.

Wait at least 1 h hours before connecting the rolling cabinet to the power
supply.
NOTICE! Damage to device due to spilled liquids.
1. Switch the device off.
2. Disconnect the device from the power supply.
3. Carefully clean the device and the accessories in accordance with the
cleaning and disinfection instructions in the operating manual.
4. If a different cleaning and disinfecting method is to be used, contact
Eppendorf AG to ensure that the intended method will not damage the device.