3 installing the rolling cabinet, Installing the rolling cabinet, Installation rolling cabinet english (en) – Eppendorf Rolling Cabinet User Manual
Page 14
Installation
Rolling Cabinet
English (EN)
14
4.3
Installing the rolling cabinet
Required tool and accessories
• Allen key
• Plastic plugs
• Foot holders which match the centrifuge
• Screws
• The foot holders must be positioned according to the centrifuge used. 16 boreholes are
located on the upper side of the rolling cabinet. The boreholes are labeled according to
the centrifuge type (5810, 5810 R, 5804, 5804 R).
• Boreholes which are not in use must be sealed to protect them from corrosion.
Abb. 4-1:Labels on the upper side of the rolling cabinet
Fig. 4-1:
Labels on the upper side of the rolling cabinet
8 foot holders are delivered with the rolling cabinet.
• 4 foot holders, 48 mm in diameter for Centrifuge 5804
• 4 foot holders, 59 mm in diameter for Centrifuge 5810, 5810 R, 5804 R
4 foot holders must be bolted to the rolling cabinet to ensure the centrifuge is
securely positioned on the rolling cabinet. The centrifuge device feet must be
centered in the foot holders.
5810 R
5810 R
5810 R
5810 R
5810
5810
5810
5810
5804 R
5804 R
5804 R
5804
5804
5804 R
5804
5804
For instructions on placing the foot holders,
refer to the operating manual.
Fasten all foot holders before removing the foil.