Eppendorf Rolling Cabinet - Manual (Page 16)

Installation
Rolling Cabinet
English (EN)
16
4.3.2 Installing the centrifuge on the rolling cabinet
Prerequisites
• The wheel stops are used to secure the castors and prevent the unit form rolling away.
• The foot holders are mounted on the upper side of the rolling cabinet (see p. 15).
Position the centrifuge with at least 2 persons in several steps:
1. Lift the centrifuge on both sides in the area close to the device feet and place it on the
rolling cabinet.
2. Check that the centrifuge is positioned correctly.
3. Lift the centrifuge with the assistance of a second person and carefully realign it.
4. Only Centrifuge 5804 R, 5810 R: Insert the condensation water tray into the designated
holder.
6. Remove the adhesive film.
CAUTION! Risk of crushing when installing the centrifuge on the rolling
cabinet.
When positioning the device feet into the foot holders there is a risk of crushing
your fingers.

Place the centrifuge on the rolling cabinet.

Check that the centrifuge is positioned correctly.

Lift the centrifuge with the assistance of a second person and check the
position.
Do not try to feel for the correct position of the centrifuge.