Aries Automotive 5058-2 - Manual (Page 7)

GRILLE GUARD
09-2013 RAM 1500
Page 6 of 6 6/4/12 (DP)
Driver Side Installation Pictured
Do not cut
through the front
or rear edge of the
splash guard
Fig 14
If required, replace the rivet at the corner
of the splash guard with the supplied:
5mm x 15mm Button Head Allen Bolt
(2) 5mm Flat Washers
5mm Nylon Lock Nut
Fig 13
Fig 15
Front
Front
Hold the splash guard up to the
brackets and mark location for cutting
to clear brackets. Cut only what is
needed to insert bracket through the
splash guard of the splash guard.
Complete Installation