Brother DCP-7010L - Manual (Page 20)

Chapter 2
2 - 3
Sleep Time
Setting the Sleep Time reduces power
consumption by turning off the fuser inside
the machine while it is idle. You can choose
how long the machine is idle (from 00 to 99
minutes) before it goes into sleep mode. The
timer is automatically reset when the machine
receives PC data or makes a copy. The
factory setting is 05 minutes. While the
machine is in sleep mode you will see Sleep
on the LCD. If you try to print or copy in sleep
mode, there will be a short delay while the
fuser warms up to its working temperature.
1
Press Menu and or to select
1.General Setup .
Press Set.
2
Press or to select 4.Ecology.
Press Set.
3
Press or to select
2.Sleep Time .
Press Set.
4
Use the or to enter the length of
time the machine is idle before it goes
into sleep mode (00 to 99).
Press Set.
5
Press Stop/Exit.
Note
If you want to turn off sleep mode, press Start
and Options simultaneously in Step 3.
Setting the LCD Contrast
You can change the contrast to help the LCD
look lighter or darker.
1
Press Menu and or to select
1.General Setup .
Press Set.
2
Press or to select
5.LCD Contrast .
Press Set.
3
Press or to select Light or
Dark .
Press Set.
4
Press Stop/Exit.
Printing the User Settings List
You can print a list of your settings.
1
Press Menu and or to select
1.General Setup .
Press Set.
2
Press or to select
6.User Settings .
Press Set.
3
Press Start.
General Setup
4.Ecology
Ecology
2.Sleep Time
General Setup
5.LCD Contrast
General Setup
6.User Settings