Brother DCP-7010L - Manual (Page 18)

2 - 1
2
Initial Setup
Setting the Paper Type
To get the best print quality, set the machine
for the type of paper you are using.
1
Press Menu and or to select
1.General Setup .
Press Set.
2
Press or to select
1.Paper Type .
Press Set.
3
Press or to select Plain,
Thin , Thick, Thicker,
Transparency or Recycled Paper.
Press Set.
4
Press Stop/Exit.
Note
■
The machine ejects paper with printed
surfaces face down onto the output paper
tray in the front of the machine. When you
use transparencies or labels, remove
each sheet immediately to prevent
smudging or paper jams.
■ You can select Transparency in Step 3
if Letter or A4 paper size has been
selected.
Setting the Paper Size
You can use seven sizes of paper for printing
copies: Letter, A4, A5, A6, B5, B6 and
Executive. When you change the size of
paper you load in the paper tray, you will need
to change the setting for paper size at the
same time so your machine can fit a reduced
copy on the page.
Note
If you selected Transparency as the paper
type, you will only be able to select Letter or
A4 size paper in Step 3.
1
Press Menu and or to select
1.General Setup .
Press Set.
2
Press or to select
2.Paper Size .
Press Set.
3
Press or to select Letter , A4,
A5 , A6, B5, B6 or Executive.
Press Set.
4
Press Stop/Exit.
Getting started
General Setup
1.Paper Type
General Setup
2.Paper Size