Snorkel SR SERIES - Manual (Page 55)

10. DAILY INSPECTION & MAINTENANCE
10 - 7 P/N 569300
16. Structural damage & welds
Visibly inspect all welds for cracks, all structural
members for deformity, and all sheet metal for
dents that could interfere with machine
operation.
17. Guardrails
Pay particular attention to the guardrails. Make
sure the guardrails are properly installed, that all
the fasteners are in place, and that the safety
chain or swinging gate is in place and works
properly.
18. Lanyard anchorages (option)
Check all four lanyard anchorages on the floor of
the platform to see that they are present, not
deformed, that they move freely, and that they
are securely attached to the platform.
19. Bubble level (machines with outriggers)
Visually check to see that the bubble level is not
damaged, that it is full of fluid, that the bubble
does not exceed the diameter of the center black
circle, and the surface on which the bubble level
is mounted is not deformed or bent out of level.
20. Guides, rollers, and slides
Visually check slides (1), and rollers (3) for wear
or damage. Be sure that the guides (2) are free
of debris and allow the slides and rollers to move
smoothly.