Snorkel SR SERIES - Manual (Page 17)

3. SPECIFICATIONS
3 - 1 P/N 569300
Snorkelift SR series machines are scissor-
supported elevating work-platforms built to
conform to the following standards:
OSHA Paragraph 1910.67 Title 29,
C.F.R.Vehicle-Mounted Elevating and Rotating
Work Platforms - Labor.
OSHA Paragraph 1926.556 Title 29, C.F.R.,
Aerial Lifts - Construction. ANSI Standard A92.6,
Self-Propelled Elevating Work Platforms.
CSA Standard CAN 3-B354.3-M82, Self
Propelled Elevating Work Platforms for use as
“Off Slab” Units.
T
GENERAL SPECIFICATIONS FOR STANDARD MACHINES
SR: SR2584 SR3284 SR4084
Weight 6280 lbs.
(2855 kg)
7650 lbs.
(3477 kg)
8720 lbs.
(3964 kg)
Max. single wheel
load 3332 lbs.
1511 kg
3560 lbs.
1615 kg
3788 lbs.
1718 kg
Ground pressure
(max) 34 psi
2.4 kg/cm 2
39 psi
2.7 kg/cm 2
45 psi
3.2 kg/cm 2
Width 84 in.
(213 cm)
84 in.
(213 cm)
84 in.
(213 cm)
Length 137 in.
(348 cm)
137 in.
(348 cm)
149 in.
(378 cm)
Height:
working
raised
lowered
31 ft.
(9.4 m)
25 ft.
(7.6 m)
47 in.
(119 cm)
38 ft.
(11.6 m)
32 ft.
(9.8 m)
53.5 in.
(136 cm)
46 ft.
(14 m)
40 ft.
(12.2 m)
60 in.
(152 cm)
Platform:
driveable ht.
size* in.
(cm)
capacity
FULL
72x120
(183x305)
1750 lbs.
795 kg)
FULL
72x120
(183x305)
1250 lbs.
(568 kg)
32 ft.
(9.8 m)
72x120
(183x305)
750 lbs.
(341 kg)
Drive wheels 4 4 4
Rear axle
Driven
Articulated
Driven
Articulated
Driven
Articulated
Tires in.
(cm) 26x12
66x30.5
26x12
66x30.5
26x12
66x30.5
Speed:
Max. drive
Max. raise
Lower
2.2 mph
(1 km/h)
22 sec
25 sec
2.2 mph
(1 km/h)
30 sec
40 sec
2.2 mph
(1 km/h)
45 sec
40 sec
Gradeability 32% 32% 30%
* Four foot (1.8 m) platform-extension retracted.
3. SPECIFICATIONS