beautypg.com

Danger – Snorkel S3246 CE User Manual

Page 26

background image

Chapter 8 – Prestart Inspection

22

S2646/3246 – 0410063EE

When inspecting or servicing the aerial platform with the
platform raised, use the following procedure to properly
position the safety prop.

1. Remove all tools and material from the platform.

2. Using the lower controls, raise the platform until the

open height between the arm pins is wide enough to
position the safety prop. Refer to Figure 8.4.

3. Swing the safety prop downward from the storage

position to the support position.

4. Remove hands and arms from the scissors structure

area.

5. Lower the platform until the scissors are supported

by the safety prop.

Use the following procedure to stow the safety prop.

1. Using the lower controls, raise the platform until the

open height between the arm pins is wide enough to
move the safety prop.

2. Swing the safety prop up to the stowed position.

Cables and Wiring Harness

Inspect all cables and wiring for wear and/or physical dam-
age such as loose connections, broken wires, and frayed
insulation. Check the wiring in areas where a change in
routing direction may cause them to become pinched (re-
fer to Figure 8.5). Make sure the cables and wires are
properly routed to avoid sharp edges, pinching, and scuff-
ing.

Figure 8.5 – Cables and Wiring Harness

Figure 8.3 – Battery Charger

4. Unplug the charger.

Safety Prop

Using the lower controls, raise the platform until the open
height between the arm pins is wide enough to position
the safety prop. Refer to Figure 8.4.

Figure 8.4 – Safety Prop

Swing the safety prop downward from the storage posi-
tion to the support position. Inspect the safety prop for
damage and deformation.

Always use the safety prop when the platform is raised
during inspection and maintenance.

A

Danger

Pinch points exist on the scissors structure. Death
or serious injury will result if the scissors structure
drops onto personnel working within the scissors
arms or under the raised platform. Properly posi-
tion the safety prop before reaching through the
scissors structure.

Safety Prop

Cables and Wiring

Ammeter

This manual is related to the following products: