Snorkel S2633 User Manual
Page 9

3 S
PECIAL
L
IMITATIONS
Page 5
3 S
PECIAL
L
IMITATIONS
D A N G E R
!
!
Travel with the platform raised is limited to creep speed range.
Elevating the Work Platform is limited to firm, level surfaces ONLY.
D A N G E R
!
!
The elevating function shall ONLY be used when the work platform is level, and on a firm surface.
The S2633 is designed for Indoor use ONLY.
The work platform is NOT intended to be driven over uneven, rough, or soft terrain.
P
L A T F O R M
C
A P A C I T Y
The maximum capacity for the MACHINE, including occupants is determined by model and options, and is
listed in “Specifications” on page 21.
D A N G E R
!
!
DO NOT exceed the maximum platform capacity or the platform occupancy limits for this machine.
M
A N U A L
F
O R C E
Manual force is the force applied by the occupants to objects such as walls or other structures outside the
work platform. The maximum allowable manual force is limited to 200 N (45 lbs.) of force per occupant,
with a maximum of 400 N (90 lbs.) for two or more occupants.
D A N G E R
!
!
DO NOT exceed the maximum amount of manual force for this machine.
L
I F T
O
V E R L O A D
A
L A R M
All models include a feature that alerts the operator when the platform load is exceeded. If the alarm
sounds during the lift function, lower the platform and reduce the platform load.
D A N G E R
!
!
NEVER operate the machine with a platform load greater than the rated capacity.