Snorkel MB20-sn1000+ - Manual (Page 27)

2 - 17
2. Operation & Specifications
D
AILY
P
REVENTATIVE
M
AINTENANCE
C
HECKLIST
Daily preventative maintenance will prevent abnormal wear and prolong the life of
all systems. The inspection & maintenance schedule should be performed at the
specified intervals.
Inspection and maintenance shall be performed by personnel who are trained and
familiar with mechanical and electrical procedures.
This Daily checklist has been designed for machine service and maintenance.
Please photocopy this page and use the checklist when inspecting the machine .
W A R N I N G ! !
Before performing preventative maintenance, familiarize yourself with
the operation of the machine.
Always block the elevating assembly whenever it is necessary to
perform maintenance while the platform is elevated.
M
AINTENANCE
T
ABLE
K
EY
Y = Yes/Acceptable
N = No/Not Acceptable
R = Repaired/Acceptable
P
REVENTATIVE
M
AINTENANCE
R
EPORT
Date: _______________________________________
Owner: _____________________________________
Model No: ___________________________________
Serial No: ___________________________________
Serviced By: _________________________________
C
OMPONENT
I
NSPECTION OR
S
ERVICE
Y N R
B ATTERY
Check electrolyte level.
Check battery cable condition.
C HASSIS
Check hoses for pinch or rubbing points.
Check welds for cracks.
C ONTROL C ABLE
Check the exterior of the cable for pinching, binding or wear.
C ONTROLLER
Check switch operation.
D RIVE M OTORS
Check for operation and leaks.
E LEVATING A SSEMBLY
Inspect for structural cracks.
E MERGENCY L OWERING
S YSTEM
Operate the emergency lowering valve & check for serviceability.
E NTIRE U NIT
Check for and repair collision damage.
H YDRAULIC F LUID
Check fluid level.
H YDRAULIC P UMP
Check for hose fitting leaks.
H YDRAULIC S YSTEM
Check for leaks.
L
ABELS
Check for peeling, missing, or unreadable labels & replace.
P
LATFORM
D
ECK AND
R
AILS
Check welds for cracks.
T YRES AND W HEELS
Check for damage.
Table 1: Daily Maintenance Checklist