beautypg.com

Synergy 8057 - Jeep JK Front Bump Stop Spacer Kit User Manual

Ppm-8057 jk front bump stop spacers

background image

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397

PPM-8057 JK FRONT BUMP STOP SPACERS

Version 1

GENERAL NOTES:

• These instructions are also available on our website; www.synergymfg.com.

Check the website before you begin for any updated instructions and additional
photos for your reference.

• These bump stop spacers come in 2.0, 3.0, and 4.0” heights. Installation is the

same for all sizes.

• Installation can be done using simple hand tools and a drill with 3/8” drill bit.

1. INSTRUCTIONS
• Locate and center punch the center of the bump stops strike pad on the axle coil spring
mounts. Drill a 3/8” hole.