Synergy 5609 - Jeep YJ Baja Basket - Manual (Page 5)

12) If roll cage padding is still desired. Remove the (4) 7/16” bolts securing the rack
and trim reinstall padding and cover, trimming where needed.
13) Once satisfied with fit and trim, reinstall the (4) 7/16” bolts and torque to 40 ft-lbs
14) Remove runners used to locate and level the rack.
15) Double check that rack is level. If adjustment is needed, loosen the 7/16” bolts
slightly and adjust to desired position.
16) The rack height can also be adjusted slightly by moving the side mounting plate
position to the bottom hole or slide the clamps up or down slightly. (Note – there
is minimal adjustment by sliding the clamps as the YJ cage tapers in at the top
prohibiting much up and down adjustment of clamp height.)
17) Soft / hard top can now be reinstalled. Installation is complete.