Synergy 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit - Manual (Page 40)

64. Now remove the door panel. It is secured to the door with 7 push pin fasteners.
These fasteners are tight, you will need to use a trim tool or pry bar near their location
to remove the first few pins. Start at the bottom and work your way up. As more
pins pop free, you should be able to get an arm up under the panel to help push the
door panel free. Once all pins have been removed, pull the panel up to clear the lip at
the top.
65. With the panel removed, use a razor blade or sharp knife to cut out the forward access
tab for the window regulator clip.
This will be the hole used to route the speaker wire through.