Synergy 5052 - Rear 4 Link Kit (Bronco, Jeep CJ, TJ, YJ, Universal) - Manual (Page 2)

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
8. Cut off any suspension bracket on the frame that you will not be using, i.e. lower
control arm brackets, shock mount, spring mounts, track bar brackets, leaf spring
hangers, etc
9. Position and clamp the new rear frame control arm brackets on the frame. The front
to back location is entirely up to you, on a TJ or YJ, up against the back of the T-case
skid plate is generally is where it goes. You may need to relocate or push the brake,
fuel lines above the frame control arm bracket.
10. Mark the bracket where the top edge of the frame is.