Synergy 5000 - Jeep TJ Front Coilover Bracket Kit - Manual (Page 4)

Figure 5
7. Weld around the lower shock mount. Clean and paint the shock new shock
bracket and axle.
8. Assemble the coilover shocks (or whichever shocks you Figure 4: Correct Shock
Mount Position are using) using the supplied hardware. The 1/2" x 4 1/2" bolt fits
in the upper mount, and the 1/2 x 2 1/2" bolt is used the lower mount. If your
shocks have remote reservoirs, install them now using the supplied hose clamps.
9. Install the limit straps using the supplied 1/2" x 1 1/4" bolts.
10. Washers are provided for the limit strap hardware.
11. Reinstall any under-hood components that may have removed. Some components
may need to be relocated or repositioned.
12. Make sure all bolts are Figure 5: Lower Shock Mount Position snug. Make
adjustments to the shocks, limit straps, and other items as necessary.
13. Enjoy your new shocks and bracket kit! Thank you for choosing Synergy
Suspension.